Shipping throughout Russia and to other countries

Pumping equipment BOTTOM, AUPD, Pilot, etc.

The mobile pumping station SNP-500/10 diesel is designed to work in an open area, irrigation and drainage works, pumping water with a temperature from 1 to 40 ° C (274-313K), which does not contain solid inclusions by weight of more than 0.05%, size - more than 0.2 mm and microhardness of more than 6.5 GPa (650kgs / mm2).
The control and protection station HMS Control L4 is designed to control and protect any three-phase asynchronous motors with a short-circuited rotor, both domestic and imported, according to operator commands or signals from sensors and meets the requirements of technical specifications TU 3432-112-00217975-2011.
The control and protection station HMS Control G is designed for automatic and manual control of a drainage pump of the "GNOME" type by a signal from a liquid level sensor and meets the requirements of technical specifications TU 3432-112-00217975-2011.
The hydraulic accumulator GA is designed to ensure the automatic operation of household electric pumps in order to create a constant pressure in the systems of household water supply of individual residential houses, cottages, homesteads and other premises.
HMS Control ST control and protection stations are designed to control one or more centrifugal pumping units of type D, K, CNS or their analogues, both domestic and imported, operating in water supply systems, pressure boosting, at pumping stations of the second or third lift.
The control and protection station HMS Control L3 is designed to control and protect downhole pumping units of the ECV type, submersible pumps of the Gnom type, their analogues of both domestic and imported production, as well as any three-phase asynchronous motors with a short-circuited rotor according to operator commands or signals from sensors and meets the requirements of technical specifications TU 3432-112-00217975-2011.
The control and protection station of the SUIZ "Pilot+" is designed to protect three-phase asynchronous electric motors and automate the process of filling liquids in containers and meets the requirements of the technical specifications of BEP.001.00.000TU.
Diesel pumping units of the BOTTOM are designed for pumping water and other liquids having properties similar to water in viscosity up to 36 *10-6 m2/s (36cSt) and chemical activity, temperature from 274 to 358 K (from 1 to 85 ° C), not containing solid inclusions by weight more than 0.05%, size more than 0.2 mm and microhardness of more than 6.5 GPa (650kgs/mm2). The units can be used in fire extinguishing systems.
Automated pressure boosting pumping units AUPD are designed to automatically increase and maintain the required pressure in water supply systems. The pumped medium is water, as well as other liquids similar to water in density, viscosity, chemical activity, not containing mineral oils, abrasive and fibrous inclusions.

Price list

Questionnaire

DOCUMENTS

All products

The group "New Technologies" offers for review the products: pumping equipment for thermal and nuclear power, water management and housing and communal services, shipbuilding, oil and gas, metallurgy, mining and chemical industries. Dynamic, volumetric and household pumps
  • Two-way inlet pumps
    Two-way inlet pumps
    dynamic NDv, 2D, etc.
  • Pumping equipment
    Pumping equipment
    BOTTOM, AUPD, Pilot, etc.
  • Household pumps
    Household pumps
    RC, RS, BV, etc.
  • Multi-section pumps
    Multi-section pumps
    TSNSP, 1KsV, etc.
  • Cantilever pumps
    Cantilever pumps
    CNA, SM, etc.
  • Plunger-diaphragm
    Plunger-diaphragm
    PD and others.
  • Rotifer pumps
    Rotifer pumps
    volumetric NKF, KV, etc.
  • Gear pumps
    Gear pumps
    AS-MNSH, NMSHG, etc.
  • Three-screw pumps
    Three-screw pumps
    AC 3B, 3B*2, etc.
  • Cantilever monoblock pumps
    Cantilever monoblock pumps
    KM-E, CVT, etc.
  • Monoblock pumps
    Monoblock pumps
    CMF and others .
  • Vortex pumps
    Vortex pumps
    AS-VK, VKS, etc.
  • Vacuum pumps
    Vacuum pumps
    VVN, 2VVN, etc.
  • Single-screw pumps
    Single-screw pumps
    EVN et al.
  • Twin screw pumps
    Twin screw pumps
    2BV, 2BG, etc.

About

The company is one of the largest manufacturers of pumping equipment in Russia. A powerful production base, active innovation, quality and reliability of manufactured equipment, and a well-developed service network have allowed the company to occupy one of the leading positions in the field of domestic pumping industry.

  • EXPERIENCE AND LEADERSHIP

    The company's reputation is confirmed by its awards: 1000 of the best enterprises and organizations in Russia, the League of the Best, For innovations in investments of the future, the Best enterprise in mechanical engineering and metalworking.

  • WIDE RANGE OF PRODUCTS

    Development and production of more than 1,000 standard sizes of pumps for thermal and nuclear power, water management and housing, shipbuilding, oil and gas, metallurgy, mining, etc.

  • INNOVATION

    Our own scientific and technical center allows us to develop new and modernize existing pumps, introduce new technologies at all stages of design and production.

Information Board

Learn more about our products.
  • Questionnaire for ordering pumping equipment
    Questionnaire for ordering pumping equipment
  • Questionnaire for ordering an automated pressure boosting unit (APD)
    Questionnaire for ordering an automated pressure boosting unit (AUPD)
  • Questionnaire for ordering DELIUM pumps
    Questionnaire for ordering DELIUM pumps
  • Questionnaire for ordering diesel pumping units (DND)
    Questionnaire for ordering diesel pumping units (DND)
  • Questionnaire for the HMS CONTROL L3 single pump control cabinet
    Questionnaire for the HMS CONTROL L3 single pump control cabinet
  • Questionnaire for the control cabinet of the HMS CONTROL ST pump group
    Questionnaire for the control cabinet of the HMS CONTROL ST pump group

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: